Hotline
+86 512-81666096152、About tank filling system - Doer equipment
Classification：Industry PublishTime：2020-07-29 08:52:12
About tank filling system
Discharge pipeline of storage tank:
The liquid in the storage tank is discharged through the liquid discharge outlet at the bottom. The discharge pipeline is provided with a low temperature stop valve at the root, which is divided into two paths after leaving the root stop valve. A low temperature stop valve at the root is respectively provided to connect the inlets of two pumps.
Tanker pipeline:
The liquid in the storage tank is discharged through the Dn40 discharge port at the bottom. The discharge pipeline is equipped with a double low temperature stop valve and a quick filling joint for tank car connection,
The liquid discharge pipeline is also provided with a gas seal structure inside the equipment, which is led out from the bottom plate of the inner groove, so as to ensure that the liquid can be discharged completely; In order to facilitate the precooling and start-up of the pump, an anti swirl structure is set at the discharge port to avoid the cavitation of the pump.
Prev： 151、On the device of liquid inlet system of storage tank - Doer equipment
Next： 180、Function and overview of air heated carburetor - Doer equipment
News
- 216、Advantages of Double Metal Full Capacity Tank … [2023-05-09]
- 215、Design principles for low-temperature storage … [2023-05-09]
- 214、Low temperature storage tank safety education … [2023-05-09]
- 213、Objectives of project construction management-… [2023-05-09]
- 212、Quality service advantages of Doer large low-t… [2023-05-09]
- 211、Advantages of Doer Large Low Temperature Stora… [2023-05-09]
- 216、Design scope of atmospheric and low-temperatur… [2023-05-08]
- 215、Process flow of low-temperature LNG storage ta… [2023-05-08]
- 214、Testing methods for low-temperature argon stor… [2023-05-08]
- 213、Performance Description of Low Temperature Eth… [2023-05-08]
