Hotline
+86 512-81666096127、Production process of storage tank (5) - Doer equipment
Classification：Industry PublishTime：2020-02-27 14:11:49
Production process of storage tank (5)
About the inner cylinder pressure test and helium leak detection in the tank production process:
Air pressure test of inner cylinder
1) Weld the stainless steel pipe orifice, leave the liquid discharge pipe orifice to connect with the air pressure test tooling.
2) The liquid nitrogen is pumped into the vaporizer by a pipeline pump in a low-temperature storage tank to make the liquid nitrogen into a gaseous state. The pressure reaches 2.31mpa and the pressure is maintained for 30 minutes.
3) Release the gas after the air pressure test is qualified.
Helium leak detection of inner cylinder
1) Cut off the air pressure test tooling, weld the vacuumizing tooling, connect the vacuum valve, first use the large flow pump to initially vacuumize the inner cylinder. After the vacuum degree reaches within 100Pa, replace it with 70 rotary vane vacuum pump, pump the vacuum degree to about 1pA, close the vacuum valve, connect the helium leak detector, and start the helium leak detector to make the vacuum degree of the helium leak detector reach the required value, Open the vacuum valve to detect the leakage of the inner cylinder.
2) All longitudinal girth welds of inner cylinder, welds between cylinder and transition joint, and butt welds of pipe shall be inspected by helium gas.
Prev： 126，Production process of storage tank (4) - Doer equipment
Next： 180、Function and overview of air heated carburetor - Doer equipment
News
- 216、Advantages of Double Metal Full Capacity Tank … [2023-05-09]
- 215、Design principles for low-temperature storage … [2023-05-09]
- 214、Low temperature storage tank safety education … [2023-05-09]
- 213、Objectives of project construction management-… [2023-05-09]
- 212、Quality service advantages of Doer large low-t… [2023-05-09]
- 211、Advantages of Doer Large Low Temperature Stora… [2023-05-09]
- 216、Design scope of atmospheric and low-temperatur… [2023-05-08]
- 215、Process flow of low-temperature LNG storage ta… [2023-05-08]
- 214、Testing methods for low-temperature argon stor… [2023-05-08]
- 213、Performance Description of Low Temperature Eth… [2023-05-08]
